Floor & Facility Signs - Page 2

OSHA requires aisles and passageways to be clear and marked (1910.22), exit routes to be marked (1910.37), fire extinguishers and emergency equipment to be identified (1910.157), and hazards to be displayed using proper sign formats (1910.145). Using OSHA/ANSI-compliant signs ensures compliance and helps pass inspections.

ANSI Z535 color codes are: red for danger, fire, or stop; orange for warning; yellow for caution and physical hazards; green for safety, first aid, and emergency egress; blue for notice or mandatory information; and black-on-white for general and housekeeping messages. Floor marking uses similar logic: yellow for aisles and traffic lanes, red for fire and defects, white for equipment, and striped tape for keep-clear zones. Consistent color coding helps workers quickly interpret spaces.

For floors, anti-slip SlipSafe vinyl and rubber-backed signs withstand heavy foot and pallet traffic, while floor marking tape is ideal for lines and lanes. For walls, rust-proof aluminum offers maximum durability; plastic and vinyl are suitable for lighter-duty or indoor use. Choose materials based on traffic and environment: harsher areas require tougher materials.

Yes. SlipSafe anti-skid floor signs feature an enclosed grit surface for added traction at hazard locations, making them suitable for entryways, wash-down areas, and spaces near sinks or coolers. Use them with wet floor signs and anti-slip tape where footing is a concern.

Identify the types of traffic: forklifts, pedestrians, and materials, and mark each with appropriate signs and colors. Use forklift and pedestrian signs at crossings, directional markers for flow, and aisle marking tape for lanes. Select heavy-duty anti-slip materials for durability and repeat markings to ensure visibility throughout the floor.

Use floor marking tape: yellow for traffic aisles, white for workstations, and striped for keep-clear zones, and reinforce with floor signs or stencils at intersections and decision points. Tape defines lanes; signs and symbols indicate their purpose.

To install floor decals on a warehouse floor, prepare the surface by sweeping, cleaning, and degreasing, then allow it to dry completely. Adhesion fails on dust, moisture, or oily film. Peel and press the decal firmly from the center outward to remove air, and let it bond before exposing to heavy traffic. Smooth, sealed concrete provides the best hold; for rough or unsealed floors, use stencil-painted markings for longer durability.

Floor decals serve as wayfinding aids, not ADA "tactile" signs. ADA and ANSI A117.1 tactile requirements: raised characters with Braille, non-glare finish, high contrast, mounted 48 to 60 inches high, apply to permanent room, exit, and space identification signs installed on walls by doors. Use compliant facility wall signs for these, and floor markings to support navigation.

Floor decals are typically 12 to 17 inches, round or square, for visibility underfoot. Facility wall signs are commonly 7" x 10", 10" x 14", and 14" x 10", with larger sizes for longer sight lines. Choose sizes based on viewing distance; there is no mandated size, so prioritize legibility.

Yes. Custom floor signs, marking tape, and facility signs allow you to add text, colors, logos, and layouts to match your facility. For plant-wide rollouts, contact our team at (800) 952-1457 (Mon – Fri, 8:00am to 7:00pm EST) or email customerservice@smartsign.com for a quote.