General Requirements for Wiring Methods and High Voltage
(101993)
Use DANGER - HIGH VOLTAGE - KEEP OUT Signs to meet NEC 300.45, 314.72(E), 490.35(A), 490.55. Choose from OSHA, ANSI, and bilingual formats.
Danger: High Voltage Keep Out Sign
OSHA Danger Sign
3.5"x5" to 36"x48"
High Voltage Keep Out (with Graphic)
ANSI Danger Sign
3.5"x5" to 18"x24"
Danger: High Voltage Keep Out (Bilingual), Vertical Sign
Bilingual OSHA Danger / Peligro Sign
3.5"x5" to 10"x14"
389.218(H) Cable Trays and Installation
(101996)
When cable trays contain conductors with voltage more than 600 V, they are required to be marked “DANGER — HIGH VOLTAGE — KEEP AWAY” at no further than 10-foot intervals.
Warning: High Voltage Keep Away Sign
3.5"x5" to 10"x14"
Danger: High Voltage Keep Away Sign
3.5"x5" to 10"x14"
Peligro - Alto Voltaje Mantenerse Alejado
3.5"x5" to 10"x14"
High Voltage Keep Away / Alto Voltaje Mantenerse Alejado
3.5"x5" to 10"x14"
Danger: High Voltage Keep Away (with graphic) Sign
3.5"x5" to 10"x14"
620.3(A) - Elevators, Dumbwaiters, Escalators, Moving Walks, Lifts & Chairlifts. Voltage Limitations. Power Circuits.
(101997)
Section 3 (A) of Article 620 in the National Electrical Code requires a "DANGER — HIGH VOLTAGE" signage where the voltage exceeds 600 volts.
Danger: High Voltage (with graphic on right) Sign
3.5"x5" to 10"x14"
Danger (ANSI): High Voltage (horizontal with bolt graphic) Sign
3.5"x5" to 12"x18"
Other NFPA 70 Standards
(103322)
Write-on labels and other printed labels are offered in polyester. Choose the material, size, and order quantity on the next page.
Do Not Provide Electrical Power Until The Grounding Electrode(s) is Installed and Connected.
2"x3" to 5"x7"
Turn Disconnecting Switch or Circuit Breaker Off Before Inserting or Removing Plug
2"x3" to 5"x7"
Parts of the Controller are not De-Energized by this switch
2"x3" to 5"x7"
Emergency Systems Grounding Sign
2"x3" to 5"x7"
This Equipment fed by multiple sources
2"x3" to 5"x7"
Volts (Write-in)
2"x3" to 5"x7"
Electric Shock Hazard. Do Not Touch Terminals.
2"x3" to 5"x7"
Other NFPA 70 Standards - Custom
(103323)
Use text that perfectly defines your electrical safety message. Make sure you show the exact voltage, amperes, hertz, or any other unit. Customization is free.
Custom Manufactured Home Equipment Label - Heating Air-Conditiong Equipment Amperes Volts Conductor Ampacity
Custom ANSI Caution Sign - Engineered Series Combination System Amperes Identify Replacement Components
2"x3" to 7"x10"
Custom ANSI Caution Sign - Series Combination System Amperes Identify Replacement Components
2"x3" to 7"x10"
Custom ANSI Caution Sign - Underground System Opeartion Volts Between Conductors
2"x3" to 7"x10"
Custom ANSI Caution Sign - Phase Volts to be Grounded for Switchboard Identification
2"x3" to 7"x10"
Custom ANSI Caution Sign - Number of Volts
2"x3" to 7"x10"
Custom ANSI Warning Sign - This Connection is for 110-125 Volt AC 60 HZ Ampere Supply
2"x3" to 7"x10"
Custom ANSI Warning Sign - This Connection is for 208Y/120-VOLT or 120/240-VOLT AC 3-POLE 4 WIRE 60 HZ Ampere Supply
2"x3" to 7"x10"
Custom ANSI Danger Sign - Fire Accident Hazard Area Grounding Requriements
2"x3" to 7"x10"
Other Related NFPA Signs
(101994)
As advertised- great adhesion, great visibility.
As advertised- great adhesion, great visibility. If this doesn’t inspire common sense caution, nothing will.